This package installs the software (display driver) to enable the following video chips on the system board.- Mobile Intel(R) 4 Series Express Chipset FamilySupported ThinkPad Systems:- R400(*1), R500(*1)- T400(*1), T400s, T500(*1)- W500(*1)- X200, X200s, X200 Tablet, X301Supported Operating Systems:- Microsoft Windows XP Home Edition, Professional- Microsoft Windows XP Tablet PC Edition 2005Note:- (*1) For the models with Switchable Graphics, make sure that the Integrated Graphics setting is selected in the BIOS Setup Utility. Refer to the following page for details.- Need to install (Microsoft) .NET Framework 3.0 before installing the video driver.- If this package has been installed, updating (overwrite-installing) this package will fix problems, add new functions, or expand functions as noted below.- This program is language independent and can be used with any language system.
Additional information
Contents
Summary of Changes
Installation Instructions
Determining which Version is Installed
Limitations
Summary of Changes
Where:
[Important] Important update
(New) New function or enhancement
(Fix) Correction to existing function
Version 6.14.10.5355 (7XD158WW)
(Fix) Fixed an issue where display on X200 will be blank or revert to VGA mode after undocking the system from Ultrabase.
Version 6.14.10.5294 (7XD157WW)
(Fix) Fixed an issue where 1680x1050 resolution is not properly displayed on Samsung SyncMaster BX2240W monitor.
Version 6.14.10.5294 (7XD156WW)
(Fix) Fixed an issue where screen turns blank on Dell or EIZO DisplayPort monitor after system is turned on with the lid closed.
Version 6.14.10.5284 (7XD155WW)
(Fix) Fixed an issue where the computer might hang with a blue screen with 0xEA error code.
Version 6.14.10.5248 (7XD154WW)
(Fix) Fixed an issue wherein Workshare application crashes intermittently.
(Fix) Fixed an issue that installation fails on Switchable Graphics model with a BIOS setting of "Integrated Graphics".
Version 6.14.10.5220 (7XD153WW)
(Fix) Fixed an issue where LCD brightness will not work after Fn+F3 screen off.
Version 6.14.10.5220 (7XD152WW)
(Fix) Fixed an issue where garbage might be displayed on LCD with specific 3D application.
(Fix) Fixed an issue where external display color setting is wrong and entire screen may turn into RGB test color pattern (red, green, blue, etc.)
(Fix) Fixed an issue where Run32DLL.exe error occurred on Windows XP Simplified Chinese Preload image.
Version 6.14.10.5160 (7XD148WW)
(New) Added support for 'DisplayPort to VGA' dongle.
(Fix) Fixed an issue that caused no display on Philips 220SW9 monitor with 1680x1050 60Hz.
(Fix) Fixed an issue that 'Intel(R) GMA 4500MHD' was incorrectly displayed in the property.
Version 6.14.10.5068 (7XD147WW)
(New) Added support for ThinkPad T400s.
(Fix) Fixed an issue where DVD playback might fail on DisplayPort.
Version 6.14.10.5002 (7XD130WW)
[Important] After plug in the AC adapter, some garbages may be displayed on LCD screen on limited condition.
(Fix) Some garbages may be displayed on DisplayPort with 2560x1536 resolution only on battery mode.
Version 6.14.10.4957 (7XD118WW)
(New) Initial release for ThinkPad R400, R500, T400, T500, X200.
(New) Support for ThinkPad X301 (added).
(New) Support for ThinkPad X200s, X200 Tablet (added).
Installation Instructions
Notes:
If your computer runs satisfactorily now, it may not be necessary to update the software. To determine if you should update the software, refer to the Determining Which Version is Installed section.
Manual Install
This section assumes to use Internet Explorer and Windows Explorer.
[Downloading file]
Click once on the underlined file name. Once this is done, some pop-up windows will appear.
Follow the instructions on the screen.
In the window to choose Run or Save, click the Save button.
Choose the folder you would like to download the file to and click the Save button. A different window will appear and the download will begin and complete. Once the download has completed, there may or may not be a message stating that the download completed successfully.
[Extracting file]
Make sure to be logged on with administrative privileges.
Locate the directory where the file was downloaded.
Locate the file that was downloaded and double-click it.
Follow the instructions on the screen.
In the "Select Destination Location" window, click Next. If you would like to select a different folder, click Browse.
In the "Ready to Install" window, click Install. All the necessary files will be extracted to the folder selected in the step 9.
[Installing files]
Make sure the checkbox next to "Install ..... now" is checked and click Finish.
Follow the instructions on the screen to complete installation and restart the computer.
Finally delete the file saved in Step 4.
Unattended Install
Note: This is intended for system administrators only.
Refer to the "Manual Install" section, and download and extract the file.
In the step 11 of the "Installing files" section, uncheck the checkbox next to "Install ..... now", and then click Finish to cancel installation.
At the command line, execute setup.exe with the -s option.Example: [Path where the files were extracted]setup -s
Determining which version is installed
Press CTRL+ALT+F12 key and open Intel(R) Graphics and Media Control Panel.
Select Options and Support section on the bottom left portion of the interface.
Select Information Center. 'Driver version' will be displayed at the right side.
Limitations
Garbage might be seen on the left side of DELL 3008 DisplayPort monitor after changing display configuration.
Show More...
Revision : 01
--------------------------------------------------------------------------------
Software Name Intel GM45 Display Driver
Support models ThinkPad R400(*1)
ThinkPad R500(*1)
ThinkPad T400(*1), T400s
ThinkPad T500(*1)
ThinkPad W500(*1)
ThinkPad X200, X200s, X200 Tablet
ThinkPad X301
Operating Systems Microsoft Windows XP Home Edition, Professional
Microsoft Windows XP Tablet PC Edition 2005
Refer to marketing materials to find out what computer models
support which Operating Systems.
Version 6.14.10.5355
Support device Intel GM45
(*1) See the Note section below.
--------------------------------------------------------------------------------
WHAT THIS PACKAGE DOES
This package installs the software (display driver) to enable the following
device.
Device name Device name in the Device Manager
----------- -----------------------------------------------
Intel GM45 Mobile Intel(R)
4 Series Express Chipset Family
Refer to marketing materials to find out what computer models support which
devices.
If this package has been installed, updating (overwrite-installing) this
package will fix problems, add new functions, or expand functions as noted
below.
This program is language independent and can be used with any language system.
--------------------------------------------------------------------------------
CHANGES IN THIS RELEASE
Version 6.14.10.5355 (7XD158WW)
[Important updates]
Nothing.
[New functions or enhancements]
Nothing.
[Problem fixes]
- Fixed an issue where display on X200 will be blank or revert to VGA mode after
undocking the system from Ultrabase.
--------------------------------------------------------------------------------
DETERMINING WHICH VERSION IS INSTALLED
1. Press 'CTRL+ALT+F12' to open Intel(R) Graphics and Media Control Panel.
2. Select 'Options and Support' section on the bottom left portion of the
interface.
3. Select 'Information Center'.
'Driver version' will be displayed at the right side.
--------------------------------------------------------------------------------
NOTES
(*1) For the models with Switchable Graphics:
The Graphics Device setting should be changed to 'Integrated Graphics' in
the BIOS Setup Utility before installing this software.
Refer to the following page for details.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-71875
- Need to install (Microsoft) .NET Framework 3.0 before installing the video
driver.
--------------------------------------------------------------------------------
INSTALLATION INSTRUCTIONS
Note:
- If your computer runs satisfactorily now, it may not be necessary to update
the software. To determine if you should update the software, refer to the
Version Information section.
Manual Install
This section assumes to use Internet Explorer and Windows Explorer.
Downloading file
1. Click once on the underlined file name. Once this is done, some pop-up
windows will appear.
2. Follow the instructions on the screen.
3. In the window to choose Run or Save, click the Save button.
4. Choose the folder you would like to download the file to and click the Save
button.
A different window will appear and the download will begin and complete.
Once the download has completed, there may or may not be a message stating
that the download completed successfully.
Extracting file
5. Make sure to be logged on with administrative privileges.
6. Locate the folder where the file was downloaded.
7. Locate the file that was downloaded and double-click it.
8. Follow the instructions on the screen.
9. In the Select Destination Location window, click Next. If you would like to
select a different folder, click Browse.
10. In the Ready to Install window, click Install. All the necessary files will
be extracted to the folder selected in the step 9.
Installing files
11. Make sure the checkbox next to "Install ..... now" is checked and click
Finish.
12. Follow the instructions on the screen to complete installation and restart
the computer.
Finally delete the file saved in the step 4.
Unattended Install
This is for system administrators' use only.
1. Refer to the Manual Install section, and download and extract the file.
2. In the step 11 of the Installing files section, uncheck the checkbox next
to "Install ..... now", and then click Finish to cancel installation.
3. At the command line, execute setup.exe with the -s option.
Example: [Path where the files were extracted]setup -s
--------------------------------------------------------------------------------
VERSION INFORMATION
The following versions have been released to date.
Version Build ID Rev. Issue Date
------------ -------- ---- ---------------
6.14.10.5355 7XD158WW 01 2011/10/19
6.14.10.5294 7XD157WW 01 2010/12/17
6.14.10.5294 7XD156WW 01 2010/10/19
6.14.10.5284 7XD155WW 01 2010/08/25
6.14.10.5248 7XD154WW 01 2010/06/04
6.14.10.5220 7XD153WW 01 2010/03/31
6.14.10.5220 7XD152WW 01 2010/03/02
6.14.10.5160 7XD148WW 01 2009/11/12
6.14.10.5068 7XD147WW 02 2009/09/11
6.14.10.5068 7XD147WW 01 2009/06/11
6.14.10.5002 7XD130WW 2nd. release
6.14.10.4957 7XD118WW Initial release
Note: Revision number (Rev.) is for administrative purpose of this README
document and is not related to software version. There is no need to
upgrade this software when the revision number changes.
To check the version of software, refer to the Determining which version is
installed section.
Summary of Changes
Where: < > Version number
[Important] Important update
(New) New function or enhancement
(Fix) Correction to existing function
<6.14.10.5355> (7XD158WW)
- (Fix) Fixed an issue where display on X200 will be blank or revert to VGA mode
after undocking the system from Ultrabase.
<6.14.10.5294> (7XD157WW)
- (Fix) Fixed an issue where 1680x1050 resolution is not properly displayed on
Samsung SyncMaster BX2240W monitor.
<6.14.10.5294> (7XD156WW)
- (Fix) Fixed an issue where screen turns blank on Dell or EIZO DisplayPort
monitor after system is turned on with the lid closed.
<6.14.10.5284> (7XD155WW)
- (Fix) Fixed an issue where the computer might hang with a blue screen with
0xEA error code.
<6.14.10.5248> (7XD154WW)
- (Fix) Fixed an issue wherein Workshare application crashes intermittently.
- (Fix) Fixed an issue that installation fails on Switchable Graphics model
with a BIOS setting of "Integrated Graphics".
<6.14.10.5220> (7XD153WW)
- (Fix) Fixed an issue where LCD brightness was not adjusted after the screen
was turned off by Fn+F3.
<6.14.10.5220> (7XD152WW)
- (Fix) Fixed an issue where garbage might be displayed on LCD with specific 3D
application.
- (Fix) Fixed an issue where external display color setting was wrong and the
screen might turn into RGB test color pattern(red, green, blue, etc.).
- (Fix) Fixed an issue where Run32DLL.exe error occurred on Windows XP
Simplified Chinese Preload image.
<6.14.10.5160> (7XD148WW)
- (New) Added support for 'DisplayPort to VGA' dongle.
- (Fix) Fixed an issue that caused no display on Philips 220SW9 monitor with
1680x1050 60Hz.
- (Fix) Fixed an issue that 'Intel(R) GMA 4500MHD' was incorrectly displayed in
the property.
<6.14.10.5068> (7XD147WW)
- (New) Added support for ThinkPad T400s.
- (Fix) Fixed an issue where DVD playback might fail on DisplayPort.
<6.14.10.5002> (7XD130WW)
- [Important]
After plug in the AC adapter, some garbages may be displayed on LCD
screen on limited condition.
- (Fix) Some garbages may be displayed on DisplayPort with 2560x1536 resolution
only on battery mode.
<6.14.10.4957> (7XD118WW)
- (New) Support for ThinkPad W500 (added).
- (New) Support for ThinkPad X301 (added).
- (New) Support for ThinkPad X200s,X200 Tablet (added).
- (New) (Initial release) Support for ThinkPad R400,R500,T400,T500,X200.
--------------------------------------------------------------------------------
LIMITATIONS
- Garbage might be seen on the left side of DELL 3008 DisplayPort monitor after
changing display configuration.
--------------------------------------------------------------------------------
TRADEMARKS
* Lenovo and ThinkPad are registered trademarks of Lenovo.
* Dell is a trademark of Dell Inc.
* DisplayPort is a trademark of Video Electronics Standards Association.
* EIZO is a registered trademark of EIZO NANAO CORPORATION.
* Intel is a registered trademark of Intel Corporation.
* Microsoft and Windows are registered trademarks of Microsoft Corporation.
Other company, product, and service names may be registered trademarks,
trademarks or service marks of others.
Show More...